This week, we’d like to introduce a cartridge valve equivalent to HydraForce FR12-33. It is a screw-in, an adjustable, pressure compensated, priority type with reverse flowcheck flow control valve. The regulated flow increases from closed to fully open with counter-clockwise adjustment rotation. The valve will maintain the set flow regardless of pressure variations on the regulated or bypass port.
Last May in 2022, a hydraulic cartridge valve customer in Russia found AAK when looking for a hydraulic cartridge valve manufacturer in China on Google. He sent us an inquiry for 5 pcs of HydraForce cartridge valve FR12-33, with an annual demand of 500 pcs. Previously, their company purchased it from an Italian supplier.
For this model, several cartridge valve manufacturers in Ningbo have existing production procedures. This Russian customer ordered 5 pcs from each factory, they will test them for 1 year, and chose one to place the annual order.
Last week, we were very happy to learn from the Russian customer that AAK cartridge valve E-FR12-33 has passed their internal testing after 1 year of use, the function and performance is the best among the several manufacturers. The samples from some manufacturers leaked or blocked in less than 1 year.
AAK hydraulic cartridge valve E-FR12-33 two advantages:
1. Pressure Rating 240 bar (3500 psi), benchmarking HydraForce
2. Its service life is 2 times that of its domestic peers
Technical parameters of AAK E-FR12-33 flow control cartridge valve:
Pressure Ratings: 240 bar (3500 psi)
Flow Ratings: 0-68 lpm (0-18 gpm) Note: Priority + bypass, 3-ported
0-45 lpm (0-12 gpm) Note: Bypass closed, 3-ported
Inlet Flow Rating (Priority + bypass): 76 lpm (20 gpm) Note: Nominal
114 lpm (30 gpm) Note: Maximum
Internal Leakage: 100cc/minute (6 cu.in./minute) at 207 bar (3000 psi)
Required adjustment torque: 1.7 Nm (15 in.-pounds) at 207 bar (3000 psi)
Temperature: - 40 to 120 °C
Cavity: 12-3
AAK E-FR12-33 flow control cartridge valve, benchmarking HydraForce FR12-33, has been approved by customer in Russia after 1 year of testing. You are welcome to try it out.
AAK HYDRAULIC VALVES (674) 2023-09-18
Hydraulic Cartridge Valve Manufacturer AAK 3 Points to Ensure Machining Accuracy of Valve Spools
For RV10-26 hydraulic cartridge relief valve with two major requirements, AAK solved the troubles of Kuzma from two problems
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, AAK Gains Further Trust from Russian Customer
The tuition fee of over 20,000 RMB, has helped the sales of hydraulic manifold manufacturer AAK understand the logic of 3 good performances
