The hydraulic directional valves produced by AAK adopts its own proprietary quenching and tempering heat treatment process, which can greatly improve the strength of the hydraulic directional valve, avoid deformation and wear of the hydraulic directional valve in the long-term use process, and significantly increase the service life. Perhaps there is no second comparable manufacturer in Ningbo like this. At most, 10% of the domestic hydraulic valve peers can compete.
The hydraulic needle valves produced by AAK has no leakage and its stability exceeds that of most of its hydraulic valve peers, enabling a foreign trade company in Guangdong to save a major global top 500 customer. The key is that AAK adopts high-precision processing equipment imported from Switzerland to produce hydraulic needle valves. At present, there are less than 5 hydraulic valve manufacturers with such high configuration in the hometown of hydraulic valves in Ningbo.
Mason, an old customer of hydraulic valves from the United States. In March this year, he was not satisfied with the quotation of one of our hydraulic valve blocks, which was nearly 7% higher than his target price, so he didn't place an order with AAK HYDRAULIC VALVE. Unexpectedly, he sent an email last week asking whether our quotation of hydraulic valve block in March was still valid. We replied that you were our old customer and the price must be valid. Mason also frankly told us that there was a problem with the hydraulic valve blocks he purchased, which made him very headache now.
Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system parameters were normal. Strangely, 10 days after the hydraulic valve block was started, the hydraulic oil in the system suddenly deteriorated.
AAK hydraulic pressure valve has no horn hole. In Ningbo, the hydraulic valve production base, few factories are sure to solve the horn hole. AAK uses automatic programming software to program and upgrade the processing technology of hydraulic valve cavity hole. The geometric tolerance of each hole is within 0.02mm. At the same time, small fillet is used to replace the R angle of our peers to transition, which completely avoids the horn hole.
Kaden, a hydraulic valve purchaser from the United States, has been successfully purchasing hydraulic valves from China in recent years, and his boss also attaches great importance to him. Last month, at the original hydraulic valve manufacturer, he place
AAK pilot hydraulic pressure valve adds welded high-strength filter screen at the inlet section of slender hole, and the damping hole is 100% unblocked. Colin faced 4 times of hydraulic pressure valve approval failures, which were solved at one time by AA
AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with the solution, and then uses the instantaneous impact force of the liquid to not only ensure that the burr of the hydraulic valve block is 100% eradicated, but a
AAK hydraulic valve, adopts URMA reaming technology of Swiss quality to process the valve spool hole in the hydraulic valve block. With the precision, reliable and efficient URMA reaming technology, the high precision of the valve spool hole of the hydrau
Maxim, from a hydraulic valve company in Russia, is a very interesting customer. This morning, there was an e-mail from him (in the spam folder). That was the first time he sent an e-mail to us. We took a look and found that he left us a message for the f
