Welcome to www.aakindustry.com

For Solenoid Cartridge Valve equivalent to HydraForce SV10-20, AAK has received 6 inquiries within 2 months

Views : 92
Update time : 2023-11-13 17:03:54

Today, we’d like to introduce a solenoid cartridge valve equivalent to HydraForce standard part SV10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard (sv10-20) and manual override (mo) options. This valve intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage.

 

The features of this solenoid cartridge valve:

 

l  Continuous-duty rated coil.

l  Hardened seat for long life and low leakage.

l  Optional coil voltages and terminations.

l  Efficient wet-armature construction.

l  Cartridges are voltage interchangeable.

l  Unitized, molded coil design.

l  Manual override option.

l  Optional waterproof E-Coils rated up to IP69K.

l  Industry common cavity.

l  Position sensor option.

 

The function of this solenoid proportional valve:

When de-energized, the SV10-20X acts as a check valve, allowing flow from port 1 to port 2, while blocking flow from port 2 to port 1. When energized, the valves poppet lifts to open the port 2 to port 1 flow path, while flow from port 1 to port 2 is severely restricted.

 

AAK has received 6 inquiries for this solenoid proportional valve within only 2 months, from August to October 2023, with 3 customers placed trial orders. This hydraulic solenoid cartridge valve is not only widely used, but also has multiple functions, especially its good performance. Although many hydraulic cartridge valve manufacturers in China can produce this hydraulic solenoid cartridge valve, and its functions may also be compared to HydraForce standard part SV10-20, their solenoid cartridge valve performance may be a problem.

 

AAK hydraulic cartridge solenoid cartridge valve 2 advantages:

1. Internal leakage: 3 drops/min, benchmarking against HydraForce

2. Its service life is 2 times that of its peers

 

Technical parameters of AAK E-SV10-20 Hydraulic Solenoid Cartridge Valve:

Max. Operating Pressure: 207 bar (3000 psi)

Flow: See PRESSURE DROP VS. FLOW graph

Internal Leakage: 3 drops/min max. at 207 bar (3000 psi)

Cavity: 10-2 

 

AAK E-SV10-20 solenoid cartridge valve, benchmarking HydraForce, within 2 months, received 6 inquiries, and 3 customer trial orders. You can also try it out.

 

AAK HYDRAULIC VALVES (714) 2023-11-13

Related News
Read More >>
For Hydraulic Pilot-to-close check valve equivalent to SUN COFA, AAK becomes the preferred supplier of an American customer For Hydraulic Pilot-to-close check valve equivalent to SUN COFA, AAK becomes the preferred supplier of an American customer
Mar .04.2024
This week, we’d like to introduce a hydraulic pilot-to-close check valve equivalent to SUN COFA, a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio.
The salesman of hydraulic cartridge valve manufacturer AAK has been complained about due to the lack of 1 single structure and 3 knowledge points The salesman of hydraulic cartridge valve manufacturer AAK has been complained about due to the lack of 1 single structure and 3 knowledge points
Mar .03.2024
On the weekend, at home, I was reading the book "Pyramid Principles" written by Barbara Minto, who was McKinsey's first female consultant.
Hydraulic cartridge valve manufacturer AAK, takes 2 hours from winter to summer Hydraulic cartridge valve manufacturer AAK, takes 2 hours from winter to summer
Mar .02.2024
The quality of the team of hydraulic cartridge valve manufacturers determines how far they can go.
AAK hydraulic cartridge pressure control valve is produced using Japanese equipment, which solves Jhon's problem AAK hydraulic cartridge pressure control valve is produced using Japanese equipment, which solves Jhon's problem
Feb .27.2024
Last March, Jhon from Canada left a message on the hydraulic cartridge valve manufacturer AAK website: Is your valve cage processing using Japanese equipment?