Welcome to www.aakindustry.com

The Hydraulic Pressure control Valve has been used at 450bar high pressure for more than 1 year. William said he couldn't find a second one except AAK

Views : 362
Update time : 2022-01-29 16:20:41

William is a purchaser of a hydraulic equipment company in the United States. At the beginning of last year, a South American customer wanted to customize a drilling machine for geological exploration. The South American customer promised to order this equipment for a long time if it has excellent performance and stability. The boss asked the engineers to design and test samples. According to the working conditions, the maximum pressure of the hydraulic system is 450bar or above, which has a very high requirement on the pressure resistance and stability of the hydraulic pilot operated pressure control valves.

 

When William received the task of purchasing this hydraulic pilot operated pressure control valve, he felt a big pressure, because the pressure resistance of normal hydraulic pilot operated pressure control valve is basically 250bar, and the maximum pressure resistance provided by previous hydraulic valve manufacturers was also only 380bar. He asked all the hydraulic valve manufacturers that he contacted before, they basically replied that according to this working condition, their hydraulic pilot operated pressure control valve can only ensure a service life of 3 months, but the customer asked for a service life of 1 year.

 

William also contacted the local hydraulic valve manufacturers in the United States. They told him that he could not promise a service life of 1 year for this hydraulic pilot operated pressure control valve. They can only test the samples first, then to know the service life. One of his other hydraulic valve manufacturers in China introduced AAK to him. He told William that AAK shipped a hydraulic pilot operated pressure control valve for a working condition of maximum pressure 450bar before, but the service life required by that customer is 6 months.

 

After receiving the drawings of the hydraulic pilot operated pressure control valve from William, AAK technical team found that the requirements of this hydraulic pilot operated pressure control valve were higher than those of our last shipment. The conventional No. 45 steel could not meet the requirements, so we had to find special steel. Later, after 5 times of material selection and testing, 2 months later, AAK internal sample testing was successful by using a German steel with high wear resistance and high fatigue resistance. After sending the samples of hydraulic pilot operated pressure control valve, we have been waiting for news from William. William said that no news from customer is the best news.

 

Last month, 1 year after AAK samples were sent, William emailed us that he would order 100 hydraulic pilot operated pressure control valves at one time. The quality standard is the same as that of the hydraulic pilot operated pressure control valves sent last year. Because the other hydraulic valve manufacturers in China can only ensure the service life of 3 months, he did not request those manufacturers to make samples, but only asked a hydraulic valve manufacturer in the United States and AAK hydraulic valve to make samples for this hydraulic pilot operated pressure control valve at the same time.

 

The test result from their customer is that the samples of hydraulic pilot operated pressure control valves provided by the hydraulic valve manufacturer in the United States needed to be treated after being used for 12 months, while the condition of AAK sample is still normal after 1 year. Therefore, they choose AAK as the supplier for this hydraulic pilot operated pressure control valve and think it is difficult to find a second one

 

The core of this hydraulic pilot operated pressure control valve is material and heat treatment. AAK adopts 20CrNi2MoV high carburizing bearing steel imported from Germany, combined with carburizing pretreatment process, through secondary quenching + cryogenic treatment + low temperature tempering process, which is cooled to 650 ~ 700 and discharged after cooling to 450 ~ 500 . The micro hardness is 237 ~ 247 HV, and its wear resistance and contact fatigue performance are increased by more than 3 times.

 

AAK customized hydraulic pilot operated pressure control valve, is suitable for high pressure working condition and durable, welcome to have a small try!

 

AAK HYDRAULIC VALVE (143) 2022-01-29

Related News
Read More >>
For Hydraulic Pilot-to-close check valve equivalent to SUN COJA, AAK received the trial order from a Customer in Germany For Hydraulic Pilot-to-close check valve equivalent to SUN COJA, AAK received the trial order from a Customer in Germany
Mar .25.2024
This week, we’d like to introduce a hydraulic Pilot-to-close check valve equivalent to SUN COJA. This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio.
For communication between hydraulic cartridge valve manufacturers and customers, AAK take the quick and direct way, and reach the destination directly For communication between hydraulic cartridge valve manufacturers and customers, AAK take the quick and direct way, and reach the destination directly
Mar .24.2024
The coils required by hydraulic cartridge valve manufacturers need to be purchased from the coil manufacturers, but the quality and price of the coil factories are uneven.
For Hydraulic Fully Adjustable Needle Valve equivalent to SUN NFDC, AAK received the trial order from a Customer in Germany For Hydraulic Fully Adjustable Needle Valve equivalent to SUN NFDC, AAK received the trial order from a Customer in Germany
Mar .18.2024
This week, we’d like to introduce a hydraulic Fully Adjustable Needle Valve equivalent to SUN NFDC.
For Hydraulic Cartridge Flow Control Valve equivalent to HydraForce FC10-20, the Russian customer placed the trial order with AAK For Hydraulic Cartridge Flow Control Valve equivalent to HydraForce FC10-20, the Russian customer placed the trial order with AAK
Mar .11.2024
This week, we’d like to introduce a hydraulic flow control valve equivalent to HydraForce FC10-20, a screw-in, cartridge style, variable orifice, hydraulic flow control valve with reverse flow check.