AAK hydraulic valve has zero leakage and Russian customer order back every 2 months
Views : 485
Update time : 2020-08-27 17:49:43
The hydraulic valves that AAK produced have zero leakage because each valve has been tested correctly on the test bench before it is packed into the box. Due to the lack of pressure test table, 90% of the peers directly packed and shipped without pressure test, thus causing many problems. AAK hydraulic valve has entered the industry top 10 ranks.
90% of small and medium-sized hydraulic valve manufacturers are either not equipped with pressure test table, or the pressure test table is just sleeping there as a device. The testing process of the pressure test table is really quite complicated. After the pressure test, the product needs to be disassembled, cleaned and reassembled, which requires a large amount of technical work. To save money, most hydraulic valve manufacturers abandon the process without testing it. Thus, even with high precision, the hydraulic valve can also appear leakage, some hydraulic valves even can not be assembled up, these phenomena are common in the country.
The pressure test table equipped by AAK HYDRAULIC VALVE is not only a complete set of parameters, but also handled by a professional test master with 7 years of experience. The test of each hydraulic valve should be repeated at least 3 times, strictly in accordance with the specified parameters to ensure the sensitivity and zero leakage. AAK hydraulic valve quality control is more QC than the customer's QC.
Last year, a customer from Russia has been purchasing hydraulic valves in Guangdong, but the he has been changing suppliers, because about 20% of the hydraulic valves purchased have oil leakage and poor sensitivity. At the beginning, when he came to our factory with samples, he could not find any problems from the appearance. In order to find problems from the production process, we directly took him to the workshop for a visit. Finally, we found that the pressure test table was not equipped with all their suppliers.
We told him that each of AAK's hydraulic components had to go through a test bench, and that 90% of the peers couldn't or wouldn't do it. At the end of his visit, we processed several hydraulic components of the same type for him to bring back to test. Less than 2 months after he returned, he gave us a trial order, and the result was certainly satisfying. Until now, there have been regular reorders every 2 months from him.
Using AAK zero leakage hydraulic valves, you can rest assured!
Asuman is from a Russian hydraulic equipment company and has purchased hydraulic manifolds from China for 4 years. At the beginning of this year, their customer wanted to customize a hydraulic manifold.