Welcome to www.aakindustry.com

The accuracy of AAK is 5% higher than that of HydraForce, and the hydraulic valve block is successfully proofed at one time

Views : 124
Update time : 2022-03-11 11:46:02

AAK uses the DMG five axis machining center imported from Germany, which improves the stability and accuracy by 30%. Less than 5% of the hydraulic valve block manufacturers in the domestic industry are equipped with this set of equipment. After suffering losses elsewhere, an American customer went back to AAK after 45 days to place the order for hydraulic valve blocks.

 

Last December, I received an inquiry from American customer Joshua about a hydraulic valve block. At that time, I was a little surprised to see the accuracy requirements of the hydraulic valve block. The accuracy was 5% higher than that of HydraForce series. This was not a small challenge, but I was still confident. The next day, I sent quotation to Joshua directly. Joshua then said that it was 12% higher compared with other hydraulic valve block manufacturers, he could not place an order with AAK. After 45 days, Joshua asked us whether the last quotation of hydraulic valve block was still valid. If the original price is maintained, he will place the order for the hydraulic valve block.

 

For the sincerity of cooperation, Joshua also frankly told why he moved the hydraulic valve block order to AAK. The original hydraulic valve block manufacturer made samples for two times, and the parameters of each hydraulic valve block were not very stable. Some hydraulic valve block sample had very good accuracy, while others were very poor, which wasted 3 weeks of time. Joshua also checked with other manufacturers. All of them are not confident to achieve the accuracy that is 5% higher than that of HydraForce series. Another 2 weeks were wasted again. The customer was very angry that the order has been placed for 5 weeks, but the sample of the hydraulic valve block still could not be approved. Joshua felt that only AAK can make the sample successfully at one time. Even if it is 12% more expensive, it is acceptable. Aware of Joshua's dilemma, we specially spare a high-precision DMG five axis machining center lathe to arrange the proofing of this hydraulic valve block. A week later, AAK sent the hydraulic valve block samples. After 10 days, there was still no feedback from Joshua about the hydraulic valve block samples. We asked Joshua to know that he was also waiting nervously.

 

Until Joshua's email last week, we know that his customer was very surprised that the accuracy of this hydraulic valve block sample not only exceeded 5% that of the HydraForce series, but the parameter stability of AAK hydraulic valve block was also more than 30% higher than that last time. Frankly, we were not surprised by this data, because more than one customer was surprised by the accuracy parameters of AAK hydraulic valve blocks.

 

The reason why the accuracy of AAK hydraulic valve block exceeds 5% of HydraForce series is that it firstly benefits from the continuous updating of the equipment. When the vast majority of hydraulic valve block manufacturers update from CNC lathe to domestic Mazak machine tool, AAK introduces DMG five axis machining center produced in Germany. The domestic Mazak machine tools have weak rigidity, poor stability and low precision after long-term processing. The lathe of DMG five axis machining center is equipped with transverse sliding seat of stiffened cast iron column, which provides the machine with high precision and high rigidity. It adopts the latest numerical control technology DMGEROline ® control panel, 19" display and 3D software, and guarantee the maximum working speed, accuracy and reliability.

 

AAK hydraulic valve block, high precision, advanced equipment, you can also have a try!

 

AAK HYDRAULIC VALVE (163) 2022-03-11

 

Related News
Read More >>
Dual Function AAK Hydraulic Cartridge Relief Valve, helped Heller Save Cost by 6% Dual Function AAK Hydraulic Cartridge Relief Valve, helped Heller Save Cost by 6%
Nov .28.2022
AAK used 3 methods to directly replace a cartridge check valve and a relief valve in the hydraulic system with one hydraulic cartridge relief valve, which not only facilitated installation,
AAK Hydraulic Valve Never Use Promotional Letter and Stick to 5A for Market Promotion AAK Hydraulic Valve Never Use Promotional Letter and Stick to 5A for Market Promotion
Nov .27.2022
Last weekend, my friend, a colleague of hydraulic valves asked for advice on the promotional letter template. He also wanted to expand the international market of hydraulic valves.
For the Hydraulic Cartridge Proportional Valve with Small Pressure Loss and Accurate Control, AAK has no competitor For the Hydraulic Cartridge Proportional Valve with Small Pressure Loss and Accurate Control, AAK has no competitor
Nov .26.2022
Brandon is from a hydraulic equipment manufacturing company in Colombia. In the early stage, they developed a forging hydraulic press.
Hydraulic Cartridge Pressure Valves with 3 High Accuracy requirements, AAK solved it in 3 Steps Hydraulic Cartridge Pressure Valves with 3 High Accuracy requirements, AAK solved it in 3 Steps
Nov .25.2022
For a hydraulic cartridge pressure control valve with 3 high accuracy requirements, Jack spent 2 months on 3 cartridge valve manufacturers but the samples from all 3 factories failed.