Welcome to www.aakindustry.com

The report of mission, vision and values of AAK hydraulic Manifolds, which comes from the encouragement of a customer

Views : 254
Update time : 2022-12-11 22:21:50

Last weekend, when I talked about the values of AAK hydraulic manifolds, unexpectedly, a customer left a message: our ideas are the same. Let me report the mission, vision and values of AAK hydraulic manifolds.

 

2022 seems to be an uncertain year. When everything becomes uncertain, the only certainty is the belief in the future, relying on the mission, vision and values. We often say that because we believe, we see.


What is a vision? Vision is a picture of a better future. For example, what changes may happen to the hydraulic industry due to the existence of AAK hydraulic manifolds. The vision of AAK hydraulic manifolds: right installation at one time, successful trial run at one time, and energy consumption reduction of more than 5%.

 

When AAK hydraulic manifolds started its business, it was full of passion, like a perpetual motion machine. After encountered more difficulties later, we also felt tired or powerless. 2 days before Christmas in 2014, our hydraulic manifold samples were not recognized for two times, and Steven canceled the hydraulic manifold order of 620,000 dollars. We spent more than 20,000 dollars and more than 2 months on these samples. The technical team didn't have weekends or rest days, and they went off work after 9 o'clock every night. As a result, all returned to zero. The weather was extremely cold that day, and the morale of the whole team was gone. I was the only one in the office. The air was chilly. Outside the window was a cold wind, whizzing. The wind was beating the branches. Several dead leaves were rolled up and swung in the air. After a while, they disappeared like ghosts.

 

The next day, I came to the office without breakfast. Because I can't give up, I have to be responsible for my employees. In my mind, I have a vision of the future inspiring me, and also attracting my team to work together. I don't want the whole team to be kidnapped by the "sense of responsibility", but motivated by the vision and mission. I think this is also the role of AAK's vision of hydraulic manifolds: "correct installation at one time, successful trial run at one time, and energy consumption reduction of more than 5%". Why did AAK hydraulic manifolds start? Only with the meaning of vision can we attract people with the same frequency, and our ideas can change from "I fight for you" to "we fight side by side for the common vision".

There is no value if only vision. For AAK, I still need to know what to do to realize this vision. What the mission of AAK hydraulic manifolds is, what our career is, or what role we play on the way to realize the vision of AAK hydraulic manifolds. AAK's hydraulic manifold mission (R&D and manufacturing, which is sufficient to benchmark the hydraulic manifolds quality of the international first-line brands) is on the way at this time.

 

Maybe you don't understand the mission and vision very well. Vision is what customers expect of you. Mission, what do you do and to what extent? Take an example to explain mission, in literary novels, the protagonist and villain are on a par in martial arts, and even the villain has a higher value in force. The protagonist defeats repeatedly, but finally defeats the villain. Why? Because the protagonist has a certain mission, such as punishing the evil and promoting the good. Because of the mission, difficulties are the strength to persevere. How does the main character do it? For example, in the first stage, they should become stronger, go to the mountain to learn martial arts. The second stage is to go down the mountain to find opportunities and start the journey of heroes. The third stage is to form a team and start a group war to destroy the rebels. Finally, the Martial Arts World returns to justice.


With vision and mission. how can we ensure that there is no deviation? The mission of AAK hydraulic manifolds is: R&D and manufacturing, which is sufficient to benchmark the hydraulic manifolds quality of the international first-line brands. Stable quality requires good materials. In the first half of this year, the steel material cost fluctuates greatly. Can we temporarily use substitute materials and resume using genuine materials when the steel material cost is stable? At this time, values are required to constrain. Absolutely not. Once this is done, it means violating the values. What values? Values, I usually understand it as the ethics of the enterprise, that is, what is your standard for being a person and doing business?

 

The commitments of AAK hydraulic manifolds in these 3 aspects are:

Behaviour: (1 zero, 3 no), zero small action, so that customers do not take detours, do not step on the pit, do not spend money wrongly.

Work: Respond to customers with efficiency and screen people with efficiency.

To be an enterprise: for a customer's question, give 3 altruistic alternatives.

 

We say that when the situation is unclear, the facts are unclear, and there is no data and logic support, people often listen to their inner voice to make decisions. This inner voice is human values. For enterprises, the existence of values is to help them make the right decisions and uphold corporate ethics when facing difficult decisions. For example, what should be done, what must be done, and what should not be done even if it can earn a lot of money. Enterprises face financial and profit pressures. If you want to solve this problem, you have to violate social responsibility. Do you continue to adhere to social responsibility or give up? For example, an enterprise must not do something. Once it conflicts with making money, it will choose this thing instead of making money.

If a hydraulic manifold manufacturer does not have a mission, vision, or long-term development values, the big probability is that it will just take orders and join in the fun when there are openings. If there is no profit, it will cut corners. It is difficult to insist on do something and not do something.

 

The vision of AAK hydraulic manifold: right installation at one time, successful trial run at one time, and energy consumption reduction of more than 5%.

 

AAK hydraulic manifold mission: R&D and manufacturing, which is sufficient to benchmark the hydraulic manifold quality of the international first-line brands.

 

AAK Hydraulic manifolds Values:

Being a man: no small action, so that customers do not take detours, do not step on the pit, do not spend money wrongly.

Work: Respond to customers with efficiency and screen people with efficiency.

To be an enterprise: for a customer's question, give 3 altruistic alternatives.

 

AAK hydraulic manifolds, do something, and also never do something.

 

AAK HYDRAULIC VALVES (437) 2022-12-11

Related News
Read More >>
For Hydraulic Piloted Directional Element equivalent to HydraForce EP16-S35, AAK received inquiries from an old customer in Russia For Hydraulic Piloted Directional Element equivalent to HydraForce EP16-S35, AAK received inquiries from an old customer in Russia
Jun .17.2024
Last week, we received an inquiry from an old customer in Russia for our new model E-EP16-S35 hydraulic piloted directional element equivalent to HydraForce EP16-S35. It is a screw-in, cartridge style, pilot to close hydraulic directional element.
For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from 2 customers after 1 year For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from 2 customers after 1 year
Jun .11.2024
Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20.
For Hydraulic Piloted Directional Element equivalent to HydraForce EP10-S35, AAK received inquiries from several new foreign customers For Hydraulic Piloted Directional Element equivalent to HydraForce EP10-S35, AAK received inquiries from several new foreign customers
Jun .03.2024
Last March, we posted a new model E-EP10-S35 hydraulic piloted directional element equivalent to HydraForce EP10-S35. It is a screw-in, cartridge style, pilot to close hydraulic directional element.
For Hydraulic Flow Divider/Combiner Valve equivalent to HydraForce FD52-45, AAK received the test order from a new customer in the United States For Hydraulic Flow Divider/Combiner Valve equivalent to HydraForce FD52-45, AAK received the test order from a new customer in the United States
May .27.2024
Last October, we received an inquiry from a new customer in the United States for a hydraulic flow divider/combiner valve equivalent to HydraForce FD52-45.