A Customer in Turkey checked with 7 Hydraulic Cartridge Valve Manufacturers in China, and finally found equivalent model of HydraForce FC10-21 at AAK

Today, AAK would like to introduce a hydraulic cartridge flow control valve E-FC10-21, benchmark HydraForce FC10-21. It is a screw-in, cartridge style, variable orifice, hydraulic flow control valve with reverse flow check. The E-FC10-21 valve increases its orifice value from fully closed to fully open with clockwise adjustment rotation.

Many hydraulic cartridge valve manufacturers in Ningbo China do not have this model. One of our customers in Turkey checked with 7
hydraulic cartridge valve manufacturers in Ningbo China within 1 month, but none of them have this cartridge flow control valve. He was very happily to find it from AAK hydraulic valve website finally via google, and the manufacturing quality and performance is equivalent to HydraForce FC10-21.

The selling points of this hydraulic cartridge flow control valve are:

1. Benchmarking HydraForce FC10-21

2. Its service life is 2 times that of its peers

Technical parameters of AAK E-FC10-21 HYDRAULIC CARTRIDGE FLOW CONTROL VALVE:

Working Pressure: 240 bar (3500 psi)

Flow Rating: 57 lpm (15 gpm) At fully open (2 turns) 5.5 bar (80 psi)

Internal Leakage: 0.50 ml/min (10 drops/min) Max. at shut off 

Operating torque required: 0.34 Nm (3 in-lb) At 7 bar (100 psi)

4.5 Nm (40 in-lb) At 207 bar (3000 psi)

Temperature Range: -40°C ~ +120 °C (with Buna N seals)

Fluids: Mineral based or synthetic hydraulic fluid with lubricating properties

Fluid viscosity range:  7.4 to 420 cSt (50 to 2000 ssu)

Cavity: VC10-2A

For this screw-in, cartridge style, variable orifice, hydraulic flow control valve with reverse flow check, its quality is benchmarking HydraForce FC10-21, you can try it out!

AAK HYDRAULIC VALVES (699) 2023-10-23