This Monday, we launched a solenoid proportional valve equivalent to HydraForce standard part SP08-21.
The features of this solenoid proportional valve:
* Continuous-duty rated coil.
* Efficient wet-armature construction.
* Optional waterproof E-Coils rated up to IP69K.
* Industry common cavity.
* Compact Size.
The function of this solenoid proportional valve:
A solenoid-operated, 2 port, normally open, poppet type proportional, screw in hydraulic cartridge valve designed for low leakage in load-holding applications. When de-engergized, the SP08-21 allows flow from 2 to 1. Flow from 1 to 2 is severely restricted. When the valve is partially energized (see performance curve) the valve begins to throttle flow from 2 to 1. When fully energized, the valves poppet closes on the seat, blocking flow from 2 to 1. The cartridge will allow 1 to 2 flow after overcoming the solenoid force.
AAK has received 5 inquiries for this solenoid proportional valve within only 3 months, from May to July 2023, with 3 customers placed trial orders. This hydraulic solenoid proportional valve is not only widely used, but also has multiple functions, especially its good performance. Although some China hydraulic cartridge valve manufacturers can produce this hydraulic solenoid proportional valve, and its functions may also be compared to HydraForce standard part SP08-21, their solenoid proportional valve performance may be a problem.
AAK hydraulic cartridge solenoid proportional valve 2 advantages:
1. Internal leakage: 5 drops/min, benchmarking against HydraForce
2. Its service life is 2 times that of its peers
Technical parameters of AAK E-SP08-21 Hydraulic Solenoid Proportional Cartridge Valve:
Max. Operating Pressure: 207 bar (3000 psi)
Flow: See PRESSURE DROP VS. FLOW graph
Internal Leakage: 5 drops/min max. at 207 bar (3000 psi)
Operating Fluid Temperature: - 40 to 100 °C (with Standard Buna N seals)
Cavity: 08-2
The newly launched AAK E-SP08-21 solenoid valve, benchmarking HydraForce, within 3 months, received 5 inquiries, and 3 customer trial orders. You can also try it out.
AAK HYDRAULIC VALVES (649) 2023-08-14
1 year after trial order was shipped, a Brazilian customer placed mass production order with AAK for a Solenoid Valve equivalent to HydraForce SV12-20
After tested by customers in USA and Russia for 1y, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20
For Hydraulic Direct-Acting Relief Valve equivalent to SUN RDBA, AAK received the re-peat order from Spanish client after 1 year
For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months
