Alfredo is from Spain. He has been smooth in purchasing for 3 years, but was stumbled in the hydraulic pressure control cartridge valve. Last October, they developed a walking reducer that needed to purchase hydraulic pressure control cartridge valve. During commissioning, the equipment stopped unstably. Their engineer judged that the buffering function of the hydraulic pressure control cartridge valve was not up to standard. The hydraulic pressure control cartridge valve manufacturer said that this situation was caused by the inertia of the travel motor when it stopped, and had nothing to do with the hydraulic pressure control cartridge valve. Alfredo was helpless in the face of the push-off of the original manufacturer.
Alfredo searched the website of AAK hydraulic valve on Google, and noticed several customer cases of AAK about hydraulic pressure control cartridge valves. He emailed us to ask: Can AAK customize the hydraulic pressure control cartridge valve to solve the unstable stop of the traveling reducer? At the same time, he also sent us the hydraulic schematic diagram and video of on-site debugging. AAK engineers analyzed that as long as the control structure of the original hydraulic pressure control cartridge valve was changed and the buffering function of the hydraulic pressure control cartridge valve was strengthened, the travel reducer could stop stably. Alfredo saw hope and asked AAK to make 7 samples of the hydraulic pressure control cartridge valves. After 50 days, AAK sent the samples of hydraulic pressure control cartridge valves.
Two days before our CNY holiday, Alfredo informed us by email that the test run of the walking reducer was smooth and their engineers were very satisfied with the buffer function of AAK hydraulic pressure control cartridge valves, the prototype has been sent to customer and let me wait patiently for their annual purchase order. The structure of the hydraulic pressure control cartridge valve is optimized from 3 aspects and AAK realizes the buffering function of the hydraulic pressure control cartridge valve.
1. The inner chamber of the hydraulic pressure control cartridge valve body is equipped with 2 limit steps. There is a buffer outlet between the 2 steps. The plug is installed at the rear end of the valve body. The valve spool is installed in the valve body, and the pressure regulating spring and buffer are sleeved on the valve spool. One end of the pressure regulating spring is connected to the limit bulge of the valve spool, and the other end is connected to the buffer. The limit bulge of the valve spool is matched with the first limit step, and the buffer is matched with the second limit step.
2. There is an inlet at the front of the hydraulic pressure control cartridge valve body, and a return port between the inlet and the first limit step. The buffer cavity is between the plug and the buffer. The valve spool has an internal flow passage connecting the liquid inlet and the buffer cavity, and the internal flow passage has an orifice.
3. For leakage prevention, 6 sealing rings and 2 retaining rings are used. There is a first sealing ring between the plug and the valve body, and a second sealing ring between the buffer and the valve body. There is a third sealing ring between the limit bulge of the valve spool and the valve body. There are the first retaining ring and the fourth sealing ring on the periphery of the front end of the valve body, the second retaining ring and the fifth sealing ring on the periphery of the middle of the valve body, and the sixth sealing ring on the periphery of the rear end of the valve body.
The optimized AAK hydraulic pressure control cartridge valve adopts the forward and reverse, as well as the same direction and two-stage opening mode. The two-stage opening pressure is independent and adjustable, reducing the system flow path, and the system has high and low unloading pressure, realizing the buffering function.
AAK, a top cartridge valve manufacturer in China, its hydraulic pressure control cartridge valve is buffered, stable and reliable. Welcome to try it!
AAK HYDRAULIC CARTRIDGE VALVES (511) 2023-02-23
For Hydraulic Pilot-Operated, Balanced Piston Relief Valve equivalent to SUN RPEC, the customer in Turkey placed their annual order with AAK
Pressure Reducing/Relieving Valve equivalent to HydraForce PR10-36 that AAK developed last March, is approved by the Russian customer after 1 year
Piloted directional valve equivalent to HydraForce PD10-41 passed testing, AAK received the more inquiries from customer in the United States
For Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB-LDN, AAK received the re-peat order from customer in Europe
