Welcome to www.aakindustry.com
News information

More than 30 Manufacturers Have Given Up the High-Precision Hydraulic Valve Sleeve, and AAK Achieved it in Two Proofs

Views : 100
Update time : 2022-01-06 10:53:12

Donald, a hydraulic valve customer from the United States, recently had an order for hydraulic valve sleeve parts with an old supplier. It took more than 30 days to adjust the approval sample of hydraulic valve sleeve for many times. The taper of hydraulic valve sleeve always failed to meet the customer requirement of 0.3-0.5μm. The manufacturer can only give up the order, but this wastes Donald's time. The trouble is that the customer is still urging the progress of the modification of the hydraulic valve sleeve. Donald consulted more than 30 hydraulic valve manufacturers online, but none of them can guarantee that the taper could reach 0.3-0.5μm. Only 2 manufacturers indicated that 1-2μm is the limit that they can reach. Donald plans to give up this hydraulic valve sleeve order, but he doesn't know how to talk to the customer.

 

While Donald was worried, his colleague Smith gave him the contact information of AAK HYDRAULIC VALVE. Smith had inquired about the hydraulic valve with AAK before. Smith directly emailed us the inquiry requirements and the drawings of the hydraulic valve sleeve, and CC Donald. He asked us to communicate with Donald directly to see how to solve the taper requirements of the hydraulic valve sleeve.

 

After our technical department had a meeting, they found that it was really a bit tricky. At present, they are not sure to tell the specific accuracy of the taper of the hydraulic valve sleeve. Except for the taper of the hydraulic valve sleeve, the straightness and roundness can fully meet the requirements. We can study the taper of the hydraulic valve sleeve while proofing. However, the specific parameters still need to be determined until the final samples come out.

 

With a try attitude, Donald asked us to start sampling the same day. A week later, we sent out the samples of the hydraulic valve sleeve. A few days later, Donald asked by email if we could try again to improve the taper accuracy of our hydraulic valve sleeve from 0.8-1.2μm to 0.3-0.5μm to meet the customer requirement. AAK technical department made modification and adjustment for 3 days and 2 nights, and sent the modified sample of hydraulic valve sleeve on the 4th day. Donald soon informed that the parameters of the second hydraulic valve sleeve sample of AAK met the requirements. Donald is curious that more than 30 hydraulic valve manufacturers can't achieve the taper accuracy of hydraulic valve sleeve. How can AAK achieve it by making samples only in two times?

 

As a precision part, the precision of hydraulic valve sleeve is guaranteed by operators and equipment, especially precision grinding is very important.

 

For most hydraulic valve manufacturers, the length of the grinder they used is basically an extended grinder with a hole length of 120%. Although it can repair and maintain the hole straightness, the accuracy of the hydraulic valve sleeve can only be controlled at 1-2μm maximum. 3 years ago, AAK adopted a grinder with a length of about 90% of the hole length, which can reach 0.5μm taper, but not stable. The taper can only be improved to about 0.5μm until the cylindrical grinder is explored to replace the extended grinder. Our proofing master has been groping on the machine for more than 12 years. He has worked out the process step by step and constantly corrected the operation method to obtain the fixed process, so as to ensure the 0.3-0.5μm accuracy high requirements of the hydraulic valve sleeve.

 

AAK hydraulic valve has been pondering precision and never stopped. You can also have a small try.

 

AAK HYDRAULIC VALVE (132) 2022-01-06

Related News
Read More >>
Original factory can’t solve failure of the pressure spring of hydraulic relief valves under high temperature. AAK can withstand 500℃ Original factory can’t solve failure of the pressure spring of hydraulic relief valves under high temperature. AAK can withstand 500℃
Aug .11.2022
Maverick is from a Canadian hydraulic equipment manufacturing company. In the first half of last year, the high-temperature hydraulic power unit dedicated to meltblown equipment sold by their company for less than 4 months was complained by customers.
The potential safety hazard of the hydraulic column can not be found, AAK newly designed hydraulic pressure reducing valves solved it with O-ring The potential safety hazard of the hydraulic column can not be found, AAK newly designed hydraulic pressure reducing valves solved it with O-ring
Aug .10.2022
At the beginning of this year, Liam from the Netherlands found AAK Hydraulic Valves on Google. He told me that he encountered the dilemma of purchasing hydraulic pressure reducing valves. Their company has developed a hydraulic support column used in coal mining.
Many hydraulic valve manufacturers can't make hydraulic relief valves with a fixed length diameter ratio of 11:1, AAK solved it with 3 points Many hydraulic valve manufacturers can't make hydraulic relief valves with a fixed length diameter ratio of 11:1, AAK solved it with 3 points
Aug .09.2022
The processing difficulty of hydraulic relief valves with deep hole is a pain point in the industry. The greater the length diameter ratio, the greater the difficulty. Pablo, an American Hydraulic customer, has recently been besieged by an order for hydraulic relief valves with a length diameter ratio of 11:1.
The sensitivity of AAK hydraulic pressure control valve is over 30% higher than that of the original manufacturer, the unsalable equipment sells hot The sensitivity of AAK hydraulic pressure control valve is over 30% higher than that of the original manufacturer, the unsalable equipment sells hot
Aug .08.2022
2 months ago, Jackson from the United States left a message on AAK website: I read the article "The throttling groove is changed from double to single triangle. The hydraulic counterbalance valve has no vibration. AAK makes Henry feel at ease for vacation".