Welcome to www.aakindustry.com

AAK hydraulic valve choose the right seal ring, no matter what medium is encountered, there is no leakage

Views : 245
Update time : 2021-03-26 14:00:19
After the last two articles about sealing rings and media have been posted, we have received a lot of e-mails from customers in recent days. It is very gratifying to find that many people have gained something. Today, we will continue to talk about the last aspect of "Application of common seals and classification of media resistance". The specific introduction is as follows:
 
1, NBR: oil resistance, heat resistance, corrosion resistance, good wear resistance, anti-aging. It is widely used in making sealing products, but not suitable for phosphate series hydraulic and gear oil containing polar additives. It can be used to make "O" ring and oil seal. It is suitable for general hydraulic and pneumatic systems. NBR is widely used in hydraulic valve system in China, and it is also the first choice of raw materials for hydraulic valve sealing ring.
 
2. Rubber and plastic: high modulus of elasticity, high strength, other properties as above. It is used to make O-ring, Y-ring and dust-proof ring. It is used in the sealing of construction machinery and high-pressure hydraulic system.
 
3. Fluororubber: heat resistant, acid and alkali resistant and other chemicals, oil resistant (including phosphate series hydraulic oil), suitable for all lubricating oil, gasoline, hydraulic oil, synthetic oil. At the same time, it is suitable for the sealing of high temperature resistant, chemical and fire-resistant hydraulic oil, and is widely used in metallurgy, electric power and other industries. Because of aging resistance and better elasticity than nitrile rubber, fluorinated rubber is preferred for hydraulic valves with high quality requirements.
 
4. Silicone rubber: good heat and cold resistance. The compression set is small, but the mechanical strength is low. It is suitable for high speed rotary seal at high and low temperature and food machinery seal. However, silicone rubber is not resistant to oil and has very poor aging resistance. Generally, it is not suitable for the hydraulic valve system. Because of the low price of silicone rubber, some hydraulic valve manufacturers ignore the quality and choose silicone rubber as the sealing ring.
 
5. Polytetrafluoroethylene: good chemical stability, heat resistance, cold resistance, resistance to oil, water, steam, drugs and other media. High mechanical strength, high temperature resistance, wear resistance, low friction coefficient, good self lubrication. It is used to make wear-resistant ring, guide ring and retaining ring, and is a common sealing material in machinery, widely used in metallurgy, petrochemical, engineering machinery and light industry machinery.
 
AAK Hydraulic Valve, save time, worry, labor and money for you!

 
Related News
Read More >>
AAK Hydraulic Cartridge Needle Valve used a 6 mm chamfer trick to solve Peder's equipment abnormality AAK Hydraulic Cartridge Needle Valve used a 6 mm chamfer trick to solve Peder's equipment abnormality
Dec .08.2022
Peder is from a hydraulic equipment company in Peru. They mainly focus on logistics transmission hydraulic equipment.
For Hydraulic Cartridge Directional Control Valve with 0.3μm valve hole, the Service Life of AAK is twice that of the original manufacturer For Hydraulic Cartridge Directional Control Valve with 0.3μm valve hole, the Service Life of AAK is twice that of the original manufacturer
Dec .07.2022
Erasmus is from a hydraulic equipment company in Colombia. He has been purchasing smoothly, but a batch of hydraulic cartridge directional control valves stumped him.
The Hydraulic Manifold that can't be solved by many manufacturers is easily solved by AAK with 3 Tricks The Hydraulic Manifold that can't be solved by many manufacturers is easily solved by AAK with 3 Tricks
Dec .06.2022
Asuman is from a Russian hydraulic equipment company and has purchased hydraulic manifolds from China for 4 years. At the beginning of this year, their customer wanted to customize a hydraulic manifold.
For the Hydraulic Manifold Block with porous system like cranial nerve, after AAK made samples successfully, customer placed an order of US$80,000 For the Hydraulic Manifold Block with porous system like cranial nerve, after AAK made samples successfully, customer placed an order of US$80,000
Dec .05.2022
Arno comes from England. They have a special hydraulic manifold block, which includes 13 groups of M32 threaded holes, and all of them are stepped holes.