Welcome to www.aakindustry.com

AAK hydraulic relief valve inner hole does not wear and deformation, orders come one after another

Views : 253
Update time : 2020-12-14 17:04:29
Mr. Chen is the purchasing manager of a well-known foreign trade company in Zhuhai for hydraulic valves. Recently, a batch of hydraulic relief valves produced in other factory had quality problem. With the delivery time approaching, but problem could not be solved, he has a big headache and can not eat or sleep well. A batch of hydraulic relief valves made of 45 steel were produced under the normal debugging of the lathe, but after inspection, it was found that the inner hole was seriously worn and deformed, not to mention the valve spool. Even if re-adjusted the parameters of the lathe, same problem still exists. Due to the serious deformation, the production has to be stopped but the delivery time is approaching, the boss is also in a worry.
 
After some search, Mr. Chen found that the material of 45 steel is soft and easy to wear. Even after heat treatment, the hardness can not meet the test requirements. Therefore, the use of this material is limited, generally only applicable to the parts with light stress and less wear points. However, in the face of increasingly fierce competition in the hydraulic valve market, many hydraulic valve manufacturers choose to use this material for its cheaper price to save cost. Therefore, 45 steel has become the first choice for their processing materials, which results in uneven product quality and market price chaos. Mr. Chen is not an exception, the original focus changed from quality comparison to price comparison.
 
Through the Internet search, Mr. Chen found our website www.aakindustry.com and checked the parameter list of our hydraulic relief valves. At the same time, he also noticed that we had an article on steel analysis in the early stage, so he took the initiative to contact our customer service and inquired about some properties and advantages of 40Cr steel material. Finally, with the mentality of trying, he transferred the order to us AAK Hydraulic Valve. After a week, he tested our hydraulic relief valve samples. Mr. Chen didn't expect that the problems of wear and deformation could be solved easily, and the hardness test also went to a new height.
 
The most commonly used material of AAK hydraulic valve is 40Cr steel. After heat treatment at appropriate temperature, the material not only achieves excellent comprehensive mechanical properties in terms of toughness, plasticity and wear resistance, but also enhances the fatigue resistance and hardenability of the product and prolongs the service life of the product. At the same time, we AAK Hydraulic Valve has our own special technology on the surface hardening treatment of steel such as high frequency quenching and tempering.
 
It has been 3 months since we delivered the goods to Mr. Chen. Today, he purchased another batch of hydraulic relief valves made of 40Cr steel. He told me that since the use of AAK hydraulic valves, customers have no complaints about material wear and leakage, and the purchase volume is gradually increasing. According to the current ordering frequency, the annual sales is expected to have a 30% increase compared with previous years. The boss is very happy and pays more attention to him now.
 
With AAK hydraulic valves made of 40Cr steel, do you still have the concern of quality comparison?
Related News
Read More >>
Dual Function AAK Hydraulic Cartridge Relief Valve, helped Heller Save Cost by 6% Dual Function AAK Hydraulic Cartridge Relief Valve, helped Heller Save Cost by 6%
Nov .28.2022
AAK used 3 methods to directly replace a cartridge check valve and a relief valve in the hydraulic system with one hydraulic cartridge relief valve, which not only facilitated installation,
AAK Hydraulic Valve Never Use Promotional Letter and Stick to 5A for Market Promotion AAK Hydraulic Valve Never Use Promotional Letter and Stick to 5A for Market Promotion
Nov .27.2022
Last weekend, my friend, a colleague of hydraulic valves asked for advice on the promotional letter template. He also wanted to expand the international market of hydraulic valves.
For the Hydraulic Cartridge Proportional Valve with Small Pressure Loss and Accurate Control, AAK has no competitor For the Hydraulic Cartridge Proportional Valve with Small Pressure Loss and Accurate Control, AAK has no competitor
Nov .26.2022
Brandon is from a hydraulic equipment manufacturing company in Colombia. In the early stage, they developed a forging hydraulic press.
Hydraulic Cartridge Pressure Valves with 3 High Accuracy requirements, AAK solved it in 3 Steps Hydraulic Cartridge Pressure Valves with 3 High Accuracy requirements, AAK solved it in 3 Steps
Nov .25.2022
For a hydraulic cartridge pressure control valve with 3 high accuracy requirements, Jack spent 2 months on 3 cartridge valve manufacturers but the samples from all 3 factories failed.