Welcome to www.aakindustry.com

AAK hydraulic valve uses nitrile rubber as sealing ring, Ron is authorized by the headquarters to issue large orders on site

Views : 345
Update time : 2020-11-26 16:36:26
Ron is one of the purchasers of an American hydraulic valve company in East China. A batch of hydraulic valves was shipped in June this year. The company's after-sales director told him that nearly 40% of consumers complained about the poor sealing and obvious oil leakage of the hydraulic valves. Ron was very surprised. He did not change the factory, and the quality had not gone wrong in previous years. How could such a low-level error occur this time? He knew that if the problem could not be solved fundamentally, he would be fired.
 
In order to find out the reason, Ron visited many manufacturers and learned that most of the hydraulic valve manufacturers used silicone sealing rings in order to save costs due to the rapid rise of materials recently. This material has good tensile properties, high temperature resistance, no deformation, and good sealing and waterproof properties, but the biggest problem is that it is not resistant to oil and acid. However, because of the strong tensile strength and convenient assembly of the silicone sealing ring, the assembly efficiency of the whole hydraulic valve is very high. In order to save the cost, many hydraulic valve manufacturers take the silicone sealing ring as the first choice.
 
When Ron realized that the factory had secretly changed the materials, he was extremely disappointed and decided to replace the old factory with a new one. Ron saw our website www.aakindustry.com on the Internet and found that there were nitrile rubber sealing rings in the introduction of each product, which was different from other hydraulic valve manufacturers. He was curious and sent us an email asking why our sealing ring is different from most factories. We suggested that he buy more than 10 samples, test the parameters himself first to approve the quality, and send them to the U.S. headquarters. Ron was pleased that the headquarters was very satisfied with the quality of AAK samples and immediately provided them to customers for trial use. A week later, the headquarters received positive feedback from users, which was very good. Ron's hanging heart finally settled down and the problem was solved.
 
AAK hydraulic valve mainly uses NBR sealing ring. This material not only has high temperature resistance, good adhesion, and corrosion resistance, but also mainly oil resistance, acid resistance, waterproof and anti-aging. It is the first choice for sealing the hydraulic system. At the same time, we can also according to the customer's requirements for different use scenarios of the hydraulic valve, specially match the sealing ring with different media to reach the standard of zero oil leakage. This is why many new and old customers choose to cooperate with us AAK Hydraulic Valve, and not easy to change suppliers.
 
1 month later, Ron visited our company. He was very impressed by our comprehensive professional knowledge and determination of quality. And thanks to us for recovering at least 40% of its losses last time, and now the purchase volume of those old users has increased by nearly 30% over the same period. What's more, he signed a cooperation agreement with AAK Hydraulic Valve for the whole year, with a purchase volume of US$800,000. He told me quietly that the headquarters was very satisfied with him and trusted him, so that he had the opportunity to place large orders with us on site.
 
AAK hydraulic valve is very strict to quality, looking forward to your trial order!

 
Related News
Read More >>
AAK Multifunctional Hydraulic Cartridge Valve, benefit all 3 Parties AAK Multifunctional Hydraulic Cartridge Valve, benefit all 3 Parties
Mar .21.2023
Monroe is from Sweden and has been purchasing hydraulic threaded cartridge valves from Ningbo for 3 years. In January of this year, their customer wanted to place a repeat order for one of their hydraulic unit equipment,
AAK new model E-SV12-41 Solenoid Cartridge Valve, Equivalent to HydraForce SV12-41 AAK new model E-SV12-41 Solenoid Cartridge Valve, Equivalent to HydraForce SV12-41
Mar .20.2023
Today, we are introducing our new model E-SV12-41 Solenoid cartridge valve, 4 port, 2 position, spool type. Equivalent to HydraForce SV12-41.
Based on a 3-Step Method Learned from Breaking a Vase, to correct the test order SOP of AAK Hydraulic Cartridge Valve Based on a 3-Step Method Learned from Breaking a Vase, to correct the test order SOP of AAK Hydraulic Cartridge Valve
Mar .19.2023
This Saturday, I was sorting out articles on hydraulic cartridge valves in my study. Suddenly, a loud and clear sound came from the living room.
5 Hydraulic Valve Blocks were complained, but 20 times the number of repeat order was placed with AAK after 4 months 5 Hydraulic Valve Blocks were complained, but 20 times the number of repeat order was placed with AAK after 4 months
Mar .18.2023
Irek from Russia has placed 6 orders with AAK for hydraulic valve blocks, including ductile iron hydraulic valve blocks, aluminum hydraulic valve blocks, and alloy steel hydraulic valve blocks.