AAK hydraulic valve is zero leakage, the Russian buyer Elaine is no longer concerned about quality and promoted

Update time : 2020-11-09 09:22:30

Elaine, a buyer in Russia, did not expect that nearly 30% of the hydraulic valves had oil leakage and poor sensitivity during the inspection of the orders that she had always paid great attention to. Before production, she emphasized the importance of the quality again and again, but there were still problems later. The hydraulic valve manufacturer didn't have the equipment of pressure test bench, so they packaged the hydraulic valves directly after production, then many problems came out. Fortunately, problems are found in the inspection process, which can avoid the loss later, but the delivery time is approaching. At present, she is eager to find a new hydraulic valve manufacturer, looking around, struggling.

The current situation of the hydraulic valve industry is that 90% of the small and medium-sized hydraulic valve manufacturers either do not have pressure test bench, or use the test bench as decoration. Because the test process of the pressure test bench is really complicated, after the pressure testing, it needs to be disassembled, cleaned and reassembled, which needs a lot of technical work. In order to save cost, most manufacturers give up this process without testing. In this way, no matter how high the accuracy of the hydraulic valve is, there will be leakage, some hydraulic valves can not even be assembled, and these phenomena are common in China.

Elaine saw our company's website www.aakindustry.com on the Internet and sent an inquiry email. 3 days later, accompanied by a Chinese, she found our company. After listening to her intention, we directly took her to the workshop to understand all the supporting production equipment and the whole process. Facing our production scale, workflow, quality inspection and packaging, Elaine regretted choosing the wrong supplier. She asked if we could help with the delivery of 1,500 hydraulic valves and asked us to deliver them within 60 days. I felt Elaine's anxiety, so through the consultation of the production department, we agreed. After 45 days of hard work, we successfully delivered the goods 15 days earlier than expected. After the previous lesson, Elaine paid great attention to the inspection. Half of the quantity was randomly selected for pressure test before delivery, and the result was that there was no oil leakage, then she was relieved to ship the goods.

Each hydraulic component of AAK has been tested by a pressure test bench with complete parameters, and a professional testing master with 7 years' experience is also equipped. Each hydraulic valve is tested at least 3 times. The quality of the hydraulic valve is strictly controlled according to the specified parameters to ensure sensitivity and zero leakage. AAK Hydraulic Valve quality control is more QC than customer QC.

Half a year later, we received the first repeat order of hydraulic valves from the Russian customer Elaine. During the same period, new and old orders for hydraulic valves were continuously signed. Up to now, the volume can reach 1.5 million US dollars per year on average. Since cooperating with us, Elaine seldom cares about product quality. She has been promoted to the manager of purchasing department.

AAK hydraulic valve can guarantee both quality and quantity, what else do you worry about?

Previous : American customers accept the suggestion to use HM46 hydraulic oil and tested an order for AAK hydraulic valve finally

Next : AAK hydraulic valve with imported piano steel wire spring, another purchaser helps the company to recover customers

AAK Hydraulic Pilot Operated Check Valve is equivalent to HydraForce DC08-40, and also the substitute of Parker CPD084P

Oct .07.2024

Recently, we received inquiries from several foreign customers for our Hydraulic Pilot Operated Check Valve E-DC08-40.

Hydraulic Pilot Operated Relief Valve equivalent to HydraForce RV10-28 passed testing, AAK received mass production order from customer in Turkey

Sep .30.2024

4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey.

For Hydraulic Piloted Directional Valve equivalent to HydraForce PD10-41, several customers are buying it from AAK constantly

Sep .23.2024

In the past two years, we shipped a hydraulic piloted directional valve equivalent to HydraForce PD10-41 to customers in the United States and Russia.

1 year after first order was shipped, Mexican customer placed re-peat order with AAK for Cartridge Check Valve equivalent to HydraForce CV16-20

Sep .16.2024

Last March, we launched a hydraulic cartridge check valve equivalent to HydraForce standard part CV16-20.

Visit us

Bona Building, No. 456 Taikang Middle Road, Yinzhou, Ningbo, China 315100

Call us

86-574-83008115

[email protected]

Leave a message