Welcome to www.aakindustry.com

The gap error between AAK hydraulic cartridge valve and valve block was reduced to 2 μ M-3 μ m, and the American customer increased the order quantity

Views : 502
Update time : 2020-10-14 11:30:09
The gap error between the hydraulic cartridge valve and the valve block produced by AAK was reduced to 2 μ M-3 μ m, and the sealing oil effect surpassed 95% of its peers. The American customer increased order volume from 30% to 50%, and there was no quality complaint.
 
Because of being used to the domestic market, most hydraulic valve manufacturers lack a certain awareness of the precision of the products, especially the gap between the hydraulic cartridge valve and the valve block. Once the gap is too large and oil leakage is unavoidable. The 95% of the hydraulic valve manufacturers in the conventional market can only achieve 8μM-10μm, and the sealing effect is just general. After 6 months of use, the hydraulic system will appear slight Oil leakage phenomenon, this is why many hydraulic cartridge valves generally just have a shelf life of 6 months.
 
Before March, Lisa, an American customer, purchased a batch of hydraulic valves of different models from our factory and another factory at the same time. A few days ago, she sent an email to inform another factory that the hydraulic valves produced by another factory had slight oil leakage, which led to the failure of pressure and flow regulation. She asked us if our last shipment would have similar problems. We don't think so. I told her that in order to save cost, 95% of the hydraulic valve manufacturers can only control the gap error between valve and block at 8μm - 10μm, which leads to the inconsistency of the product's normal use and shelf life. Lisa was skeptical and tested 10 samples from another factory, and the gap error was mostly about 8μM-10μm. At the same time, she also tested and compared the parameters of our samples, and the results showed that the gap error of our products was 2-3μM. Seeing such a big difference and also in order to ensure the service life of the products, Lisa increased our order quantity from 30% to 50%. So far, there has been no quality complaint.
 
Under the premise of normal use, the shelf life of AAK hydraulic valves can generally be controlled for 1-2 years, they are mainly equipped with skilled production masters and advanced production equipment. At the same time, each product is debugged by the R & D team before production, and mass production is arranged only after the parameters are tested to be qualified. This is why the gap error between AAK hydraulic valve and valve block can be controlled within 2M-3μM, and also what most peers lack.
 
For high quality sealing effect, AAK can save you a lot of costs, don't hesitate, welcome to try!
Related News
Read More >>
For Hydraulic Flow Divider/Combiner Valve equivalent to HydraForce FD52-45, AAK received the test order from a new customer in the United States For Hydraulic Flow Divider/Combiner Valve equivalent to HydraForce FD52-45, AAK received the test order from a new customer in the United States
May .27.2024
Last October, we received an inquiry from a new customer in the United States for a hydraulic flow divider/combiner valve equivalent to HydraForce FD52-45.
For Hydraulic Pilot Operated Relief Valve equivalent to HydraForce RV10-28, the customer in Turkey got back to AAK after 1 year For Hydraulic Pilot Operated Relief Valve equivalent to HydraForce RV10-28, the customer in Turkey got back to AAK after 1 year
May .20.2024
In January 2023, we received an inquiry from a customer in Turkey for a pilot operated relief valve equivalent to HydraForce RV10-28.
2 years after Solenoid Cartridge Valve equivalent to HydraForce SV08-47C was shipped, AAK received the reorder from customer in the United States 2 years after Solenoid Cartridge Valve equivalent to HydraForce SV08-47C was shipped, AAK received the reorder from customer in the United States
May .13.2024
In March 2022, we shipped a Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV08-47C to a customer in the United States.
Hydraulic Check Valve equivalent to HydraForce HCV10-20 passed 1 year of testing, AAK received the regular order from customer in the United States Hydraulic Check Valve equivalent to HydraForce HCV10-20 passed 1 year of testing, AAK received the regular order from customer in the United States
May .07.2024
Last March, we shipped a Hydraulic Check Valve equivalent to HydraForce HCV10-20 to a customer in the United States.