AAK hydraulic relief valve strictly controls the roundness error of oil sealing surface within 0.005 - 0.01mm, so as to avoid unbalanced force of pressure regulating spring due to rough circumferential surface, which aggravates the oscillation of poppet valve and causes squeal problem. Dutch customer directly placed an order after comparing several relief valves from different hydraulic valve manufacturers.
Recently, a customer mentioned that the hydraulic relief valves purchased from some other hydraulic valve manufacturers have a squeal after being used for a period of time. After further understanding, it is found that many hydraulic valve manufacturers do not control the roundness error of the sealing surface accurately. The test results show that the roundness error of the sealing surface of the pilot relief valve produced by some hydraulic valve manufacturers is generally between 0.012 - 0.02, which will inevitably lead to unbalanced force to the pressure spring, aggravate the oscillation of the poppet valve, resulting in squeal phenomenon.
In mid-December, Mathias, a Dutch customer, contacted us through his friend Andreas. Nearly 10% of the hydraulic relief valves that he recently purchased elsewhere have quality problems, which seriously affect the normal use of the hydraulic valve system.
Each manufacturer's production process, precision processing are different, we cannot give an accurate solution before we see the product. Mathias arranged to send out several hydraulic valves in stock on the same day. A week later, we tested the parameters of the hydraulic valve samples we received. After testing, we found that the circumferential surface of these products was rough and the roundness error was between 0.012 mm and 0.02mm, which made the relief valve squeal. We sent the test parameters and analysis results to Mathias, and told him that the roundness error of the sealing oil surface of AAK hydraulic valve can be accurately controlled within 0.005 - 0.01mm. At the same time, we attached the parameter comparison of similar models, which is what many of our peers lack at present.
Seeing nearly twice the error control, but also out of the trust of his friend Andreas, Mathias placed the first order of more than 60,000 US dollars the next day, and stressed that it must be produced according to the existing parameters of AAK, which strictly controls the roundness error of the sealing surface of the hydraulic valve.
AAK Hydraulic valve is an enterprise that is obsessive about cleanliness. It strictly controls the quality of its products. Since the start of the factory, it has constantly updated its advanced measuring instruments. From traditional calipers to today's electronic measuring instruments, it accurately controls the error range to ensure the normal use of the products. This is why AAK can achieve nearly twice the error control for the same roundness of sealing surface.
With the AAK hydraulic valve, there is no harsh squeal.
Mablevi is from Turkey. In early November, he left a message on the hydraulic cartridge valve manufacturer AAK website: Can you deliver 200 pcs of hydraulic pressure control valves within 20 days, equivalent to HydraForce RV08-22?
This week, we’d like to introduce a hydraulic cartridge relief valve equivalent to SUN RDDA. This Direct-acting relief cartridge is normally closed, pressure-limiting valve used to protect hydraulic components from pressure transients.
Bona Building, No. 456 Taikang Middle Road, Yinzhou, Ningbo, China 315100