AAK relief valve has already used Korean piano steel wire instead of carbon steel as the core material of pressure spring for a long time, which completely solves the vibration and noise problems caused by the deformation of pressure spring, which is not the only advantage of AAK relief valve. At present, nearly 90% of the hydraulic valve manufacturers can't do it, even if they think about it, they don't do it.
In the domestic market, many hydraulic valve manufacturers do use carbon steel as pressure spring for hydraulic relief valve. Carbon steel is cheap, easy to process and has high production efficiency. However, there may be a hidden and fatal problem. The hardness of carbon steel increases with the increase of carbon content, which leads to the decrease of plasticity and toughness, the weakening of tensile strength and the deterioration of stability. In use, as long as the spring is adjusted many times, the spring deformation is obvious and the resilience is weakened, which leads to the uneven pressure distribution and the radial force imbalance of the poppet valve, and causes the vibration and noise of the hydraulic relief valve.
Mr.Wang, manager of a foreign trade company in Shenzhen, purchased a batch of hydraulic relief valves in Zhejiang in the first half of this year. Now the customer complained that nearly 20% of the hydraulic relief valves have vibration and noise phenomenon, seriously affecting the normal use of the relief valve. In order to find out the reason, Mr. Wang spent half a month in the main production base of hydraulic valve in China (Zhenhai, Ningbo, Zhejiang), and visited several hydraulic valve manufacturers continuously.
The peer suggested him to contact AAK Hydraulic Valve. After he arrived at our factory, we disassembled his relief valve sample and tested the parameters of the main parts such as the inner hole and spring. The results showed that the accuracy of the inner hole of the relief valve had reached the normal standard, but the tensile strength of the spring was not enough, which was the reason that affected the normal use of the relief valve.
As early as 5 years ago, we have replaced carbon steel with piano steel wire to avoid vibration and noise caused by deformation of compression spring, and AAK relief valve has never received any complaints from customers.
After comparing the parameters of our relief valve assembled with the piano steel wire spring, he brought back some AAK relief valves for testing. About a week later, we received an order of 20,000 US dollars from the company of manager Wang.
AAK relief valve has been using Korean imported piano steel wire as the pressure spring. This material has high intensity, anti-fatigue performance, creep resistance, excellent flexibility and anti-corrosion. At the same time, its tensile strength is obviously much better than carbon steel. It is the first material choice for the pressure spring of AAK Hydraulic valves.
Why are orders for AAK hydraulic valve increasing? Because we've been working on small details and solving big problems one by one.
AAK HYDRAULIC VALVE (26) 2020-12-22
Piloted directional valve equivalent to HydraForce PD10-41 passed testing, AAK received the more inquiries from customer in the United States
For Pilot-Operated Pressure Reducing/Relieving Valve equivalent to SUN PPDB-LDN, AAK received the re-peat order from customer in Europe
For Hydraulic Flow divider/combiner valve equivalent to HydraForce FD50-45, AAK received the trial order from a Customer in the United States
For Hydraulic Pilot-to-close check valve equivalent to SUN COJA, AAK received the trial order from a Customer in Germany
