Welcome to www.aakindustry.com

News information

The sensitivity of AAK hydraulic pressure control valve is over 30% higher than that of the original manufacturer, the unsalable equipment sells hot

Views : 62
Update time : 2022-08-08 10:59:23

2 months ago, Jackson from the United States left a message on AAK website: I read the article "The throttling groove is changed from double to single triangle. The hydraulic counterbalance valve has no vibration. AAK makes Henry feel at ease for vacation". I feel that your hydraulic valve engineers are creative in the original design. I have a hydraulic pressure control valve. I always feel that the design is not perfect. Are you interested in redesigning it?

 

I like to read the user's message. The first thing I do when I open the computer is to read the message and then look at the inquiry. The inquiry with "difficult and complicated problems" will facilitate the transaction. I suggest Jackson send the hydraulic pressure control valve drawings, hydraulic schematic diagrams, and the problems encountered in the current procurement of hydraulic pressure control valves.

 

It turns out that Jackson is from a material handling hydraulic equipment company in the United States, and he has been engaged in procurement for many years and has been purchasing very smoothly. This time, he encountered a big difficulty on the hydraulic pressure control valve purchased. 1 year ago, Jackson’s company developed a hydraulic loader. After the trial, the customer advised that the sensitivity was not high during the operation process, so it was not needed any more. Their sales director was very angry and blamed the purchasing department for dragging his feet. After testing, the field engineer think that the probable cause of the problem is that the hydraulic pressure control valve has no pressure compensation function and the opening and closing speed of the valve is not ideal. So the engineer redesigned the hydraulic pressure control valve and optimized the whole hydraulic system. After 1 month, the newly designed hydraulic pressure control valve was installed and debugged. The operator reported that the equipment had been improved a lot, but he always felt that it was not perfect enough to buy. The sales director directly complained to the boss. Jackson had to constantly look for new manufacturers of hydraulic pressure control valves, but there was no substantive harvest.

 

After half a day of analysis, AAK engineers finally found the key points. I replied to Jackson that AAK would redesign the hydraulic pressure control valve to solve the sensitivity problem he encountered. After 40 days, AAK sent 6 hydraulic pressure control valve samples. 2 weeks later, Jackson emailed us that the sensitivity of the equipment was improved by at least 30% with the new hydraulic pressure control valve designed by AAK. The user was also very satisfied and was willing to buy the equipment. The boss was very happy.

 

The hydraulic pressure control valve newly designed by AAK belongs to the built-in zero leakage pressure compensation valve, which realizes the "zero leakage" load maintenance and the falling speed is not affected by the external load. When unloading, the hydraulic pressure control valve cuts off the signal branch, and no oil in the unloading signal branch flows back to the oil tank under high pressure, completely eliminating this part of energy loss, thus achieving the effect of accurate control, And the annual energy saving of the hydraulic loader can also reach about 10%.

 

AAK hydraulic pressure control valve, high sensitivity and energy saving, accuracy tolerance 1μm., opening and closing for 1 second, you can also try it!

 

AAK HYDRAULIC CARTRIDGE VALVES (312) 2022-08-08

Related News
Read More >>
Hydraulic cartridge pressure control valve specially for manifold with off center cavity, AAK assisted Galeno to participate in the exhibition Hydraulic cartridge pressure control valve specially for manifold with off center cavity, AAK assisted Galeno to participate in the exhibition
Sep .28.2022
Galeno, from Spain, has cooperated with AAK for 2 years and tried several non-standard customized hydraulic cartridge pressure control valves. At the beginning of this year, they developed a hydraulic windlass to be promoted in the exhibition.
The hydraulic cartridge flow control valve failed in 3 proofs with the old supplier cooperated for 3 years, it was different after AAK took over The hydraulic cartridge flow control valve failed in 3 proofs with the old supplier cooperated for 3 years, it was different after AAK took over
Sep .27.2022
The supplier who has cooperated for 3 years has failed to test the hydraulic cartridge flow control valve for 3 times. After AAK took over, the accuracy requirements were met at one time for the sample.
The boss wanted to disband the project team because of the problem of the hydraulic manifold, Timothy paid $6000 privately to choose AAK The boss wanted to disband the project team because of the problem of the hydraulic manifold, Timothy paid $6000 privately to choose AAK
Sep .26.2022
Timothy from Italy has cooperated with AAK for 4 years. Our first cooperation started from hydraulic manifolds. In the first half of this year, their company planned to introduce a new, multi-functional hydraulic press at the exhibition.
The manual of hydraulic valve, which is unknown to 90% of people, is broken down by AAK according to The manual of hydraulic valve, which is unknown to 90% of people, is broken down by AAK according to "pouring drinks into cups"
Sep .25.2022
If someone asks you to write down the operation steps of "pouring the drink from the plastic bottle into the cup", 90% of people think it is simple, and 3 steps are completed: 1. Open the bottle cap. 2. Pour the drink into the cup. 3. Close the bottle cap.