Galeno, from Spain, has cooperated with AAK for 2 years and tried several non-standard customized hydraulic cartridge pressure control valves. At the beginning of this year, they developed a hydraulic windlass to be promoted in the exhibition. They need a hydraulic cartridge pressure control valve for the hydraulic system of the windlass. Galeno got samples from local manufacturer of hydraulic cartridge pressure control valves. After the commissioning, the pressure control of the equipment is unstable. The engineer judged that the cavity of the hydraulic manifold was off center, resulting in unstable pressure control of the hydraulic cartridge pressure control valve after being screwed in. The hydraulic manifold manufacturer needed 2 months to re sample, but the exhibition was less than 50 days, Galeno was worried.
Galeno tried to find a new hydraulic manifold manufacturer. When I received his inquiry for hydraulic manifold, I was a bit surprise. After communication, I learned that he encountered unstable pressure control of hydraulic cartridge pressure control valve. I told him that under similar circumstances, it is not necessary to re produce the hydraulic manifold. 1 year ago, AAK developed a specially designed hydraulic cartridge pressure control valve, which was specially designed to coordinate with the off center cavity of the hydraulic manifold. Galeno compared the technical parameters of the AAK hydraulic cartridge pressure control valve and it basically matched the hydraulic system of their hydraulic windlass.
2 weeks after the sample was sent, Galeno informed that the installation of AAK hydraulic cartridge pressure control valve to the equipment was smooth, and the machine test was normal. The prototype was already on the way to the exhibition. His boss was very satisfied with this urgent solution. I told him that the unique design of AAK hydraulic cartridge pressure control valve was beyond the imagination of most hydraulic valve manufacturers. We got inspiration from an old customer. The customer purchased the hydraulic manifold block and the hydraulic cartridge pressure control valve from 2 different factories. After the installation was abnormal, the two factories passed the buck. At that time, we imagined whether it was possible to let the hydraulic cartridge pressure control valve match the hydraulic manifold block with off center cavity, or vice versa.
AAK technical team has figured out that the middle thread can be used in the hydraulic cartridge pressure control valve, that is, the floating structure. The connection area of the port can be optimized, and the center of the thread position can be positioned to maximize the flow capacity and minimize the eccentric influence of the hydraulic manifold block cavity. The diameter of the valve shoulder at the thread provides guidance to ensure the accurate alignment of the thread. The space of the valve shoulder is sufficient, which increases the flexibility of the installation torque and is not easy to damage the torque. The installation torque space can minimize the impact of hydraulic pressure on the valve and is conducive to pressure control.
AAK hydraulic cartridge pressure control valve, specially designed to match the hydraulic manifold block with off center cavity, you can also have a small try!
AAK HYDRAULIC CARTRIDGE VALVES (363) 2022-09-28
For Pressure Reducing/Relieving Valve equivalent to HydraForce PRES50-30, Brazilian Customer placed regular order 1 year after the trial order
How much money Chinese hydraulic manifold manufacturers can earn, depends on the cognition of the leaders
Chinese hydraulic manifold manufacturers inflate with too many orders, and AAK returns to zero in temples
AAK Hydraulic Directional Control Valve PC08-30, with 30% higher efficiency and 1μm higher accuracy
