3 factories failed to leak free, finally AAK Hydraulic Valve solved the pain point of American customer

Update time : 2021-06-22 13:52:32

Andrew, a senior American purchaser for Hydraulic Valves, has recently ordered hydraulic valves. He visited 3 different hydraulic valve manufacturers in 3 times, but the inner leakage of the hydraulic valve sample is still very serious. The delivery is urgent and he is embattled. This order is for type PC12-00 hydraulic control check valve, but the hydraulic valve samples from these 3 manufacturers all have the problem on the leakage volume, and other technical parameters can meet the requirements. In desperation, Andrew has to source for new hydraulic valve manufacturers.

Andrew checked with all his hydraulic valve suppliers, none of them could reach 3 (drops)/ min@207bar Internal leakage parameters of the system. When hesitating, he happened to see our website AAK Hydraulic Valve on the Internet. After many inquiries, we sent him a similar product with very similar internal leakage parameters.

A week later, Andrew decided to visit our factory. In fact, we didn't hold much hope. It was learned later that after screening, all the indicators of our samples were basically in line with his requirements, and Andrew decided to choose AAK Hydraulic Valve. After visiting the workshop and many communications, we decided to try the sample according to his design draft.

Because his hydraulic valve is very strict in the control of internal leakage, it took us 10 days to proofing this type of one-way valve, which was originally to be finished in 7 days. Fortunately, Andrew was very satisfied with our hydraulic valve samples, and the parameter error of leakage in the hydraulic valve was within the acceptable range, so he signed an order contract with us on the same day, and stressed that delivery must be on time.

AAK Hydraulic Valve strictly control the "leakage", not only use the higher resistance and corrosion resistance fluoro rubber seal ring, but also install inductance measuring instrument on each lathe, grinder and other equipment, so that each part size is accurate, to ensure the accuracy of the hydraulic valve processing, so that users can use it more reassurance.

The word "leakage" is the most sensitive word in the hydraulic valve industry. For consumers, if there is leakage in the products they buy, it will affect the normal operation of the whole hydraulic system, which is the most concerned problem of consumers. However, in order to save costs, some hydraulic valve manufacturers cut corners, although the hydraulic valve did not leak in a short time, after many times of debugging, the leakage is more obvious. Although they have received many complaints from customers, it is difficult for many hydraulic valve manufacturers to make improvements. Due to the price, it has become a chaos in the hydraulic valve industry.

AAK has been on the way to solve the chaos of hydraulic valves. If you also need hydraulic valves, you can contact us at any time: [email protected]

Previous : The filtration accuracy is up to 10 microns. American customer tried AAK Hydraulic Valve and re-ordered half a year later

Next : AAK hydraulic valve to ensure the accuracy of the inner hole, and no vibration and noise, Canadian client impressed