Welcome to www.aakindustry.com

Hydraulic Directional Control Valve for chemical use and anti-corrosion over 1 year, AAK has innovative material selection and top-notch processing

Views : 140
Update time : 2023-06-01 10:50:40

Vladilen is from Russia. Recently, he was heartbroken by a hydraulic directional control valve that is to be used in chemical engineering and needs to be corrosion-resistant for over 1 year. AAK does not adhere to conventional material selection, replacing traditional carbon steel with stainless steel, and has skilled processing of stainless steel, achieving an accuracy of within 2μm, helping Vladilen received a big order finally.

 

At the beginning of this year, a hydraulic system used in a chemical plant required a hydraulic directional control valve, and anti-corrosion for more than 1 year was a challenge. Vladilen asked more than 10 hydraulic directional control valve manufacturers, but none of them were not able to meet the requirement of chemical anti-corrosion for 1 year.

 

Vladilen left a message on the AAK hydraulic valve website: Can AAK produce hydraulic directional control valves for use in chemical plants that are corrosion-resistant for more than 1 year? I told him that stainless steel needs to be used to replace traditional carbon steel in the production of valve bodies, but the difficulty of cutting stainless steel is high, the cutting temperature is high, and the tool life is short. Not only is efficiency low, but the surface accuracy of the valve cage is also a major obstacle. Most hydraulic valve manufacturers in China may consider using stainless steel to produce valve bodies, but they cannot master the processing efficiency and accuracy and have to give up. Our suggestion may have given Vladilen hope, he directly requested AAK to make samples. After 50 days, AAK sent out 30 samples of hydraulic directional control valves with stainless steel valve bodies.

 

Last week, Vladilen placed his first order for 500 hydraulic directional control valves. Their engineers are very satisfied with the accuracy of AAK samples, especially the valve hole accuracy not exceeding 2μm. The better news is that AAK hydraulic directional control valves have been recognized by their testing and can withstand corrosion for more than 1 year.

 

AAK hydraulic directional control valve used in chemical plants can be corrosion-resistant for more than 1 year, due to 3 advantages:

 

1. For the material selection, we dare to use the most difficult to cut stainless steel to produce valve bodies. This is the most solid barrier for corrosion prevention for more than 1 year.

 

2. The processing of stainless steel materials uses Baker reamers imported from Germany, made of high cobalt steel material, with sharp and smooth edges, smooth hole walls, and an accuracy of within 2μm.

 

3. Equipped with DC-507 semi synthetic cutting fluid, its special cooling performance easily reduces cutting heat, and its lubricity, permeability, and rust resistance are the most suitable for stainless steel cutting needs, while also protecting the tool.

 

AAK hydraulic directional control valve, used in chemical plants and corrosion-resistant for more than 1 year, you can also try it out!

 

AAK HYDRAULIC VALVES (596) 2023-06-01

Related News
Read More >>
Hydraulic Cartridge Valve Manufacturer AAK 3 Points to Ensure Machining Accuracy of Valve Spools Hydraulic Cartridge Valve Manufacturer AAK 3 Points to Ensure Machining Accuracy of Valve Spools
Nov .29.2023
A Hydraulic cartridge valve manufacturer in Ningbo failed 3 samples on the valve spool, and AAK focused on 3 points and passed the test once
For RV10-26 hydraulic cartridge relief valve with two major requirements, AAK solved the troubles of Kuzma from two problems For RV10-26 hydraulic cartridge relief valve with two major requirements, AAK solved the troubles of Kuzma from two problems
Nov .28.2023
A while ago, Kuzma from Russia left a message on the website of hydraulic cartridge valve manufacturer AAK:
1.Can you provide RV10-26 hydraulic cartridge relief valve with an adjustable hand knob?
2. Each valve needs to be tested at a low flow rate of 2L/min to ensure that the pressure can be adjusted within a range of up to 200 bar.
3. What is the price and lead time for 50 pcs of RV10-26 hydraulic cartridge relief valves?
For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, AAK Gains Further Trust from Russian Customer For Hydraulic Solenoid Cartridge Valve equivalent to HydraForce SV12-34, AAK Gains Further Trust from Russian Customer
Nov .27.2023
This week, we’d like to introduce a hydraulic solenoid cartridge valve equivalent to HydraForce SV12-34. It is a solenoid operated, two position, three way, direct acting spool valve.
The tuition fee of over 20,000 RMB, has helped the sales of hydraulic manifold manufacturer AAK understand the logic of 3 good performances The tuition fee of over 20,000 RMB, has helped the sales of hydraulic manifold manufacturer AAK understand the logic of 3 good performances
Nov .26.2023
A few days ago, the development department of hydraulic manifold manufacturer AAK received a financial reimbursement document for me to sign. The rework cost for a set of hydraulic manifold is over 20,000 RMB.