Welcome to www.aakindustry.com
News information

AAK Hydraulic Valve Block Is 100% Burr Free, Which help Chase get out of dilemma resulted from 4 Proofing Failures

Views : 53
Update time : 2021-09-17 11:55:48
Chase is the purchaser of a hydraulic valve company in the United States. The purchase of hydraulic valves has been very smooth for 2 years, but a recent order for hydraulic valve blocks made him very difficult. In the sample approval stage of the hydraulic valve block, the samples had been revised for 4 times, but during the test, it was still found that there were different degrees of burrs at the cross holes of the valve block. Although the last sample had been greatly improved, there were still subtle burrs, which was easy to cause system faults such as unbalanced pressure regulation. His customer did not accept the pre-production sample of hydraulic valve block, and the hydraulic valve manufacturer was still exploring the solution of burr. The customer was pushing, the boss was asking, and the manufacturer had no effective plan. What should he do? He had trouble in sleeping and eating because the delivery date would not wait for him.
 
The burr of hydraulic valve block is produced during drilling. The shape and size of the burr are related to the spindle speed, drilling feed, work piece material, cutting tool, coolant, bit geometric angle and other factors. It really needs unique skills to clean it thoroughly.
 
Chase found AAK hydraulic valve through Google search. He emailed us some common questions about the hydraulic valve block. I felt that he had encountered a problem, but he was not sure whether I could solve it and also afraid of wasting time. I directly asked him to tell me the problem of the hydraulic valve block. If it could be solved, I would make the sample directly for him to test. Perhaps he was also surprised that I was so direct, and immediately sent me the drawing of the hydraulic valve block with a special mark in red, saying that it must be 100% burr free. I see, it was the burr problem of the hydraulic valve block.
 
How to remove burrs? Different manufacturers have different treatment processes. The hydraulic valve factory cooperated with Chase uses manual method to remove burrs. The work piece is polished and deburred with tools such as file, sandpaper and grinding head. This method has blind spots, general effect and low efficiency, especially for the burrs in complex cross holes.
 
After Chase received our hydraulic valve block sample, he did simulation test. The previous problems such as unbalanced system pressure regulation were solved. The system pressure regulation became more sensitive and the problem was smoothly solved. Chase asked us to help deliver the goods as soon as possible.
 
How to remove burrs for 100%? AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with the solution, and then uses the instantaneous impact force of the liquid to not only ensure that the burr of the hydraulic valve block is 100% eradicated, but also effectively clean each part of the hydraulic valve block. Most of our peers do not have such a process.
 
The customer was very happy that Chase was able to solve the problem quickly this time, and the boss appreciated his ability to deal with the problem. When chatting on LinkedIn a few days ago, Chase told me that because of AAK hydraulic valve block, the sales volume of his customers in the same period had increased nearly twice. Now the boss attaches great importance to him.
 
Use AAK hydraulic valve block, you will never worry about being "stabbed" by burrs. You can also try a small order.
 
AAK Hydraulic Valve (78) 2021-09-17

 
Related News
Read More >>
The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with
Oct .20.2021
The hydraulic directional valves produced by AAK adopts its own proprietary quenching and tempering heat treatment process, which can greatly improve the strength of the hydraulic directional valve, avoid deformation and wear of the hydraulic directional valve in the long-term use process, and significantly increase the service life. Perhaps there is no second comparable manufacturer in Ningbo like this. At most, 10% of the domestic hydraulic valve peers can compete.
AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use
Oct .19.2021
The hydraulic needle valves produced by AAK has no leakage and its stability exceeds that of most of its hydraulic valve peers, enabling a foreign trade company in Guangdong to save a major global top 500 customer. The key is that AAK adopts high-precision processing equipment imported from Switzerland to produce hydraulic needle valves. At present, there are less than 5 hydraulic valve manufacturers with such high configuration in the hometown of hydraulic valves in Ningbo.
American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block
Oct .18.2021
Mason, an old customer of hydraulic valves from the United States. In March this year, he was not satisfied with the quotation of one of our hydraulic valve blocks, which was nearly 7% higher than his target price, so he didn't place an order with AAK HYDRAULIC VALVE. Unexpectedly, he sent an email last week asking whether our quotation of hydraulic valve block in March was still valid. We replied that you were our old customer and the price must be valid. Mason also frankly told us that there was a problem with the hydraulic valve blocks he purchased, which made him very headache now.
More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago
Oct .15.2021
Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system parameters were normal. Strangely, 10 days after the hydraulic valve block was started, the hydraulic oil in the system suddenly deteriorated.