Welcome to www.aakindustry.com
News information

12 Minutes later after Following AAK For 327 Days, Russian Customer Placed A Small Order of Hydraulic Flow Valve

Views : 27
Update time : 2021-09-24 13:30:30
Maxim, from a hydraulic valve company in Russia, is a very interesting customer. This morning, there was an e-mail from him (in the spam folder). That was the first time he sent an e-mail to us. We took a look and found that he left us a message for the first time 327 days ago.
 
It was learned from the email that he had previously purchased a batch of hydraulic flow valves in other hydraulic valve manufacturer. After receiving the shipments of the hydraulic flow valves, he found that the parameters of hydraulic flow valve were inconsistent with those in the artwork. When he asked the hydraulic valve manufacturer about this problem, the manufacturer replied that the function of the hydraulic flow valve would not be affected. He believed it. After a period of time, some customers complained, which made him criticized by the boss several times. For example, the valve was stuck, there was oil leakage, the valve spool could not be opened, and there were more than 120 hydraulic flow valves needed to be replaced. Maxim was also confused. He had cooperated with this hydraulic valve manufacturer for several times. How could there be these problems.
 
Maxim's first message on the B2B platform to us was "interesting", 327 days ago. Later, on our company website, B2B platform, social media etc., as long as there were articles or information about AAK hydraulic valve, he would basically gave comments or likes, and occasionally asked a question about hydraulic valve, but the interaction frequency was not high. We had an impression of him and always thought that he was the hydraulic valve peer, not the customer.
 
We replied by email that the inconsistency in the accuracy or parameters of the hydraulic valve was due to the interaction of multiple factors such as raw material grade and process technology. According to your customers' complaints, problems should be from the following 3 points:
 
1. The machining accuracy of the parts is low, the assembly quality is poor, and the oil is too dirty, resulting in the jamming of the valve spool.
 
2. The valve spool is not in close contact with the valve seat, and the different shafts of the valve body hole and the valve spool are too large, resulting in leakage.
 
3. The coaxiality between the valve spool hole and the control piston hole exceeds the standard, and the top of the control piston is bent, so that the valve spool cannot be opened.
 
At present, what he urgently needed to solve was the problem of goods replacement for customer and to ensure the quality of hydraulic valves. I replied that AAK hydraulic valve not only pursue the accuracy of hydraulic valve, but also pay more attention to the stability of hydraulic valve. We could achieve what you want most with minimal cooperation.
 
12 minutes after the e-mail was sent, the test order for 120 hydraulic flow valves came. I asked, don't you need us to send you samples for testing first? Maxim said he had paid attention to AAK hydraulic valve for a long time and believed in the quality of AAK hydraulic valve. If this order was shipped smoothly and has no problems later, he would consider AAK as the preferred Hydraulic Valve supplier.
 
This order goes well... If you are in trouble, don't hesitate to contact me as soon as possible!
 
AAK Hydraulic Valve (79) 2021.09.24

 
Related News
Read More >>
The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with
Oct .20.2021
The hydraulic directional valves produced by AAK adopts its own proprietary quenching and tempering heat treatment process, which can greatly improve the strength of the hydraulic directional valve, avoid deformation and wear of the hydraulic directional valve in the long-term use process, and significantly increase the service life. Perhaps there is no second comparable manufacturer in Ningbo like this. At most, 10% of the domestic hydraulic valve peers can compete.
AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use
Oct .19.2021
The hydraulic needle valves produced by AAK has no leakage and its stability exceeds that of most of its hydraulic valve peers, enabling a foreign trade company in Guangdong to save a major global top 500 customer. The key is that AAK adopts high-precision processing equipment imported from Switzerland to produce hydraulic needle valves. At present, there are less than 5 hydraulic valve manufacturers with such high configuration in the hometown of hydraulic valves in Ningbo.
American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block
Oct .18.2021
Mason, an old customer of hydraulic valves from the United States. In March this year, he was not satisfied with the quotation of one of our hydraulic valve blocks, which was nearly 7% higher than his target price, so he didn't place an order with AAK HYDRAULIC VALVE. Unexpectedly, he sent an email last week asking whether our quotation of hydraulic valve block in March was still valid. We replied that you were our old customer and the price must be valid. Mason also frankly told us that there was a problem with the hydraulic valve blocks he purchased, which made him very headache now.
More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago
Oct .15.2021
Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system parameters were normal. Strangely, 10 days after the hydraulic valve block was started, the hydraulic oil in the system suddenly deteriorated.