Welcome to www.aakindustry.com
News information

Factory Can Not Even Achieve The Valve Spool Ra Value at 0.16μm, but AAK Has Already Mass Produced Hydraulic Valves 5 Times Finer Than It

Views : 64
Update time : 2021-09-01 11:04:58
Charles is our old hydraulic valve customer. Some time ago, he purchased a batch of hydraulic flow valves from a hydraulic valve manufacturer in Guangdong. However, he didn't expect to be busy on changing suppliers before the order was shipped. The hydraulic flow valves can not pass inspection. The surface roughness Ra value of hydraulic valve spool work piece should be below 0.16μm, but there was 0.2μm0.25μm0.28μm in mass production. The problem had not been properly solved through repeated communication. Seeing that the delivery date was approaching, Charles was worried and could only plan to cancel the order with his customer.
 
It is easy to lose the customer if there is no solution but directly express the problem like this. His boss asked him to get the solution and let the customer decide whether to cancel the order. I noticed that he was asking for help on LinkedIn. After communicating with him, I learned the whole story.
 
This hydraulic valve manufacturer in Guangdong is Charles old supplier. It has been supplying his company with some conventional hydraulic valves. He had asked the manufacturer whether the surface roughness Ra value of the valve spool could reach below 0.16μm, and the manufacturer said that there was no problem. The proofing was also smooth, then Charles decided to place order with this hydraulic valve manufacturer. Later, it was learned that this hydraulic valve manufacturer could not produce hydraulic valve with Ra value below 0.16μm due to the limitation of its own process equipment and technology. The manufacturer was worried that the customer might walk away, so he accepted the order regardless of his ability. The proofing of this manufacturers hydraulic valve was outsourced. It was originally agreed that the mass production was also completed by the proofing factory, but the proofing factory rejected the production of the goods finally. Then the hydraulic valve manufacturer arranged mass production in its own factory without authorization, thinking it could muddle through.
 
I asked him to send us the drawings of this hydraulic flow valve and told him that AAK had mass produced the valve spool with the Ra value reached 0.02 ~ 0.04μm. He immediately asked the production time for 1000 hydraulic flow valves by e-mail, and asked the old supplier to send us several production samples to see the quality.
 
After getting the support of AAK, Charles truthfully told his customer that the current goods can not pass inspection, he needs to change factory and needs another 2 months to for re-production. Unexpectedly, the customer expressed understanding. Out of the trust of cooperation, the customer not only did not cancel the order, but also accepted the new delivery date.
 
We have produced the hydraulic valves with Ra value of valve spool at 0.02 ~ 0.04μm, which can't be done by our peers. Let's take a look at how AAK HYDRAULIC VALVE makes the valve spool.
 
AAK proprietary valve spool processing technology: the valve spool generally uses bar material as blank and is processed after normalizing. The process includes: cutting the end face, drilling the center hole, rough turning and fine turning the outer circle, end face and inner hole of countersunk groove, drilling, milling, heat treatment, grinding the center hole, grinding the outer circle, and finishing the outer circle. At the same time, in grinding, high finish grinding is generally used to make the surface roughness Ra value of the work piece below 0.16μm, some RA values can even reach 0.02 ~ 0.04μm, the roughness value can be nearly 10 times higher than that of our peers.
 
After we started producing this hydraulic flow valve, and sent a video to show Charles our production situation and progress, he was finally able to relax and said he would start his vacation.
 
AAK value spool high precision, let you rest assured.
 
AAK HYDRAULIC VALVE (74) 2021-09-01

 
Related News
Read More >>
The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with The Service Life of Hydraulic Directional Valve is a Hard Index of AAK, Which is Difficult for 90% of Manufacturers to Compete with
Oct .20.2021
The hydraulic directional valves produced by AAK adopts its own proprietary quenching and tempering heat treatment process, which can greatly improve the strength of the hydraulic directional valve, avoid deformation and wear of the hydraulic directional valve in the long-term use process, and significantly increase the service life. Perhaps there is no second comparable manufacturer in Ningbo like this. At most, 10% of the domestic hydraulic valve peers can compete.
AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use AAK Hydraulic Needle valve has no leakage, 3 of 500 Global Top Enterprises in Use
Oct .19.2021
The hydraulic needle valves produced by AAK has no leakage and its stability exceeds that of most of its hydraulic valve peers, enabling a foreign trade company in Guangdong to save a major global top 500 customer. The key is that AAK adopts high-precision processing equipment imported from Switzerland to produce hydraulic needle valves. At present, there are less than 5 hydraulic valve manufacturers with such high configuration in the hometown of hydraulic valves in Ningbo.
American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block American Customer Was Deceived And Returned to AAK to Place An Order, Only Because of AAK Coating Technology for Hydraulic Valve Block
Oct .18.2021
Mason, an old customer of hydraulic valves from the United States. In March this year, he was not satisfied with the quotation of one of our hydraulic valve blocks, which was nearly 7% higher than his target price, so he didn't place an order with AAK HYDRAULIC VALVE. Unexpectedly, he sent an email last week asking whether our quotation of hydraulic valve block in March was still valid. We replied that you were our old customer and the price must be valid. Mason also frankly told us that there was a problem with the hydraulic valve blocks he purchased, which made him very headache now.
More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago
Oct .15.2021
Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system parameters were normal. Strangely, 10 days after the hydraulic valve block was started, the hydraulic oil in the system suddenly deteriorated.